HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
define_node
INVALID_MIN_CONWINNERS
The min_conwin_src parameter was not in the valid range, or was greater than plu_mode_session_limit.
INVALID_MIN_CONTENTION_SUM
The sum of the min_conloser_src and min_conwin_src parameters exceeded the value of
plu_mode_session_limit.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.42 define_node
The define_node command defines a new node, or modifies an existing node. It must be issued to a server
where the node is not running; it cannot be issued to a running node.
When using the command-line administration program to configure a node for the first time (creating the node’s
configuration file) define_node must be the first command issued.
There is no equivalent command to delete a node. If you want to remove the entire configuration of the node and
create a completely new configuration, stop the node, and then delete or rename the node’s configuration file. Next,
issue a new define_node command to the inactive node to create a new node configuration file.
2.42.1 Supplied Parameters
Parameter name Type Length Default
[define_node]
node_name character 128 (null string)
description character 31 (null string)
node_type constant END_NODE
fqcp_name character 17
cp_alias character 8
mode_to_cos_map_supp constant YES
mds_supported constant YES
node_id hex array 4 0x05DFFFFF
max_locates decimal 1500
dir_cache_size decimal 255
max_dir_entries decimal 0
locate_timeout decimal 0
reg_with_nn constant YES
reg_with_cds constant YES
mds_send_alert_q_size decimal 100
cos_cache_size decimal 24
tree_cache_size decimal 40
tree_cache_use_limit decimal 40
max_tdm_nodes decimal 0
max_tdm_tgs decimal 0
max_isr_sessions decimal 1000
isr_sessions_upper_threshold decimal 900
138