HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
define_ip_port
Outbound link activation limit (the number of links reserved for outbound activation). The sum
of inb_link_act_lim and out_link_act_lim must not exceed tot_link_act_lim; the difference between
out_link_act_lim and tot_link_act_lim defines the maximum number of links that can be activated inbound
at any time.
act_xid_exchange_limit
Activation XID exchange limit. Specify a value in the range 1–65,535.
nonact_xid_exchange_limit
Nonactivation XID exchange limit. Specify a value in the range 1–65,535.
max_ifrm_rcvd
Maximum number of I-frames that can be received by the local link stations before an acknowledgment is
sent. Specify a value in the range 1–127.
target_pacing_count
Indicates the desired pacing window size. Specify a value in the range 1–32,767.
max_send_btu_size
Maximum BTU size that can be sent from this port. This value is used to negotiate the maximum BTU size
that a pair of link stations can use to communicate with each other. The value includes the length of the TH
and RH (total 9 bytes), as well as the RU. Specify a value in the range 265–65,535.
remote_hostname
Remote host name of the destination node. This parameter is used for incoming calls that cannot be matched
to an explicit LS definition on this port.
This parameter can be specified as a dotted-decimal IP address (such as 193.1.11.100), as a name (such
as newbox.this.co.uk), or as an alias (such as newbox). If you specify a name or alias, the HP-UX
system must be able to resolve this to a fully qualified name (either using the local TCP/IP configuration or
using a Domain Name server).
implicit_cp_cp_sess_support
Specifies whether CP-CP sessions are allowed for implicit link stations using this port. Possible values are:
YES
CP-CP sessions are allowed for implicit link stations.
NO
CP-CP sessions are not allowed for implicit link stations.
implicit_limited_resource
Specifies whether implicit link stations off this port are defined as limited resources. Possible values are:
NO
Implicit links are not limited resources and are not automatically deactivated.
NO_SESSIONS
Implicit links are limited resources and are automatically deactivated when no active sessions are using
them.
INACTIVITY
Implicit links are limited resources and are automatically deactivated when no active sessions are using
them or when no data has flowed for the time period specified by the implicit_deact_timer parameter.
• If no SSCP-PU session is active across the link, the node deactivates the link immediately.
113