HP-UX SNAplus2 R7 Administration Command Reference
Administration Commands
define_ip_ls
max_send_btu_size decimal 1461
initially_active constant NO
react_timer decimal 30
react_timer_retry decimal 0
restart_on_normal_deact constant NO
max_ifrm_rcvd decimal 0
branch_link_type constant UPLINK (used only
if this node is BrNN)
adj_brnn_cp_support constant ALLOWED (used only
if this node is BrNN)
ip_ack_timeout decimal 2000
ip_max_retry decimal 10
liveness_timeout decimal 10000
short_hold_mode constant NO
remote_ip_host character 100
Supplied parameters are:
ls_name
Name of the link station to be defined.
description
A text string describing the LS. SNAplus2 uses this string for information only. It is stored in the node’s
configuration file and returned on the
query_ls, query_pu, and query_downstream_pu commands.
port_name
Name of the port associated with this link station. This name must match the name of a defined port.
adj_cp_name
Fully qualified name of the adjacent CP for this LS. Specify 3–17 type-A characters that consist of a 1–8
character network name, followed by a period, followed by a 1–8 character CP name. This parameter is used
in the following ways:
• If the
adj_cp_type parameter is set to NETWORK_NODE or END_NODE, and preassigned TG numbers are
being used, set this parameter to the CP name defined at the adjacent node; if the adjacent node sends a
CP name during XID exchange, it will be checked against this value.
• If adj_cp_type is set to any other value, or if preassigned TG numbers are not being used, there is no
need to specify this parameter; SNAplus2 checks the CP name only if one is specified.
adj_cp_type
Adjacent node type.
If preassigned TG numbers are not being used, this parameter is usually set to LEARN_NODE, indicating that
the node type is unknown; SNAplus2 will determine the type during XID exchange.
If preassigned TG numbers are being used, you must specify the node type explicitly. You can also specify
the type as an additional security check if preassigned TG numbers are not being used. In this case, SNAplus2
will reject a connection attempt from the adjacent node if its node type does not match the one specified for
this parameter. Possible values are:
LEARN_NODE
The adjacent node type is unknown; SNAplus2 will determine the type during XID exchange.
END_NODE
The adjacent node is an End Node, a Branch Network Node acting as an End Node from the local
node’s perspective, or a LEN node that includes the Network Name CV in its XID3.
NETWORK_NODE
102