HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (QUERY Verbs)
QUERY_STATISTICS
Chapter 4 955
The communications mode with the adjacent LS.
Possible values are:
SDL_MIB_HALF
Two-way alternate (half-duplex)
SDL_MIB_FULL
Two-way simultaneous (full-duplex)
sdl_ls_stats_table.last_fail_ctrl_in
The control field from the last frame received before the
last failure. If the LS has not failed, this field is set to
zeros.
sdl_ls_stats_table.last_fail_ctrl_out
The control field from the last frame sent before the
last failure. If the LS has not failed, this field is set to
zeros.
sdl_ls_stats_table.last_fail_frmr_info
If the last failure was caused by a frame that was not
valid, this parameter contains the information field
from the FRMR frame. If the LS has not failed, or if the
failure cause was not a frame that was not valid, this
field is set to zeros.
sdl_ls_stats_table.last_fail_replyto_s
The number of times that the reply timeout expired
before the last failure. If the LS has not failed,this field
is set to zero.
sdl_ls_stats_table.g_poll
The group poll address for the LS. If the LS is not in a
group, this field is set to zero.
sdl_ls_stats_table.sim_rim
Specifies whether the LS supports transmission of SIM
and RIM control frames. Possible values are:
SDL_MIB_YES
LS supports SIM and RIM.
SDL_MIB_NOLS