HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (QUERY Verbs)

QUERY_LU_0_TO_3

Chapter 4 779

AP_3270_DISPLAY_MODEL_3

AP_3270_DISPLAY_MODEL_4

AP_3270_DISPLAY_MODEL_5

AP_PRINTER

AP_SCS_PRINTER

AP_RJE_WKSTN

AP_UNKNOWN

lu_0_to_3_detail.def_data.sscp_id

Speciﬁes the ID of the SSCP permitted to activate this

LU. This is a 6-byte binary ﬁeld. If this parameter is set

to binary zeros, the LU may be activated by any SSCP.

lu_0_to_3_detail.def_data.timeout

Timeout for the LU, speciﬁed in seconds. If a timeout is

supplied and the user of the LU speciﬁed

allow_timeouton the OPEN_LU_SSCP_SEC_RQ (or, in

the case of PU concentration, on the downstream LU

deﬁnition), then the LU will be deactivated after the

PLU-SLU session is left inactive for this period and one

of the following conditions applies:

• The session passes over a limited resource link.

• Another application wishes to use the LU before

the session is used again.

If the timeout is set to zero, the LU will not be

deactivated.

Returned Parameters: Parameter Check

If the verb does not execute because of a parameter error, SNAplus2

returns the following parameters:

primary_rc

AP_PARAMETER_CHECK

secondary_rc

Possible values are: