HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (QUERY Verbs)
QUERY_LS
Chapter 4 759
Delay is in the range 480-49,512
microseconds (typical for a telephone
network).
AP_PROP_DELAY_PKT_SWITCHED_NET
Delay is in the range 49,512-245,760
microseconds (typical for a
packet-switched network).
AP_PROP_DELAY_SATELLITE
Delay is greater than 245,760
microseconds (typical for a satellite
link).
AP_PROP_DELAY_MAXIMUM
Maximum propagation delay.
ls_detail.def_data.tg_chars.user_def_parm_1 through
def_data.tg_chars.user_def_parm_3
User-defined parameters, which include other TG
characteristics not covered by the above parameters.
Each of these parameters is set to a value in the range
0-255.
ls_detail.def_data.target_pacing_count
Numeric value between 1 and 32,767 inclusive
indicating the desired pacing window size. (The current
version of SNAplus2 does not make use of this value.)
ls_detail.def_data.max_send_btu_size
Maximum BTU size that can be sent.
ls_detail.def_data.ls_role
Link station role. This is normally set to
AP_USE_PORT_DEFAULTS, specifying that the LS role is
taken from the definition of the port that owns this LS.
If the LS has been defined with a specific LS role
overriding the port definition, this is one of the
following values:
AP_LS_PRI Primary
AP_LS_SEC Secondary