HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (QUERY Verbs)
QUERY_LS
Chapter 4 747
ls_detail.det_data.reverse_anr_label
This parameter is reserved.
ls_detail.det_data.local_address
The local address of this link station.
ls_detail.det_data.max_send_btu_size
Maximum BTU size that can be sent on this link, as
determined by negotiation with the adjacent node. If
the link activation has not yet been attempted, a zero
value is returned.
ls_detail.def_data.description
A null-terminated text string describing the LS, as
specified in the definition of the LS.
ls_detail.def_data.initially_active
Specifies whether this LS is automatically started
when the node is started. Possible values are:
AP_YES
The LS is automatically started when
the node is started.
AP_NO
The LS is not automatically started;
it must be started manually.
ls_detail.def_data.react_timer
Reactivation timer for reactivating a failed LS. If the
react_timer_retry parameter below is nonzero, to
specify that SNAplus2 should retry activating the LS if
it fails, this parameter specifies the time in seconds
between retries. When theLS fails, or whenan attempt
to reactivate it fails, SNAplus2 waits for the specified
time before retrying the activation. If
react_timer_retry is zero, this parameter is ignored.
ls_detail.def_data.react_timer_retry