HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_NODE
Chapter 3332
cp_create_parms.store_dlur_rscvs
Specifies whether RSCVs should be stored for
diagnostic purposes (AP_YES or AP_NO). If this field is
set to AP_YES, then an RSCV will be returned on the
QUERY_DLUR_LU verb. (Setting this value to AP_YES
means an RSCV will be stored for each PLU-SLU
session using DLUR. This extra storage can be up to
256 bytes per session.)
cp_create_parms.dlur_support
Specifies whether DLUR is supported (AP_YES or
AP_NO). For a LEN node, this parameter is reserved.
cp_create_pams.pu_conc_support
Specifies whether PU concentration is supported
(AP_YES or AP_NO).
cp_create_parms.nn_rar
Reserved (set this parameter to zero).
cp_create_parms.hpr_support
This parameter is reserved
cp_create_parms.max_ls_exception_events
The maximum number of LS exception events to be
recorded by the node.
cp_create_parms.ptf
Array for configuring and controlling future program
temporary fix (ptf) operation, as follows:
cp_create_parms.ptf[0]
REQDISCONT support. SNAplus2 normally uses
REQDISCONT to deactivate limited resource host
links that are no longer required by session traffic. This
byte can be used to suppress use of REQDISCONT, or
to modify the settings used on REQDISCONT requests
sent by SNAplus2. Set this byte to one of the following
values:
AP_NONE