HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3274
This link should not be automatically
activated in an attempt to contact a
network node server.
If the local node is not an end node, this parameter is
ignored.
def_data.ls_attributes
This array contains further information about the
adjacent node, as described in the following
parameters:
def_data.ls_attributes[0]
Host type. Set this to AP_SNA unless you are
communicating with a host of one of the other types
listed below. Possible values are:
AP_SNA Standard SNA host.
AP_FNA Fujitsu Network Architecture
(VTAM-F) host.
AP_HNA Hitachi Network Architecture host.
def_data.ls_attributes[1]
Network Name CV suppression for a link to a
back-level LEN node.
If adj_cp_type is set to AP_BACK_LEVEL_LEN_NODE or
AP_HOST_XID3, specify whether to suppress inclusion of
the Network Name CV in the format 3 XID sent to the
LEN node, using one of the following values:
AP_NO
Include the Network Name CV in the
XID.
AP_SUPPRESS_CP_NAME
Do not include the Network Name
CV.
If adj_cp_type is set to any other value, this
parameter is ignored.
def_data.adj_node_id