HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 269
Preassigned TG number. This parameter is used only if
the adjacent node is an APPN node ( adj_cp_type is
either AP_NETWORK_NODE or AP_END_NODE); it is ignored
otherwise.
This TG number is used to represent the link when the
link is activated. The node will not accept any other
number from the adjacent node during activation of
this link; if the adjacent node is using preassigned TG
numbers, the same TG number must be defined by the
adjacent node on the adjacent link station.
If the local node is a LEN node, or if the adjacent node
is a LEN node and the link is to be auto-activatable, set
the TG number to 1. Otherwise, specify a number in
the range 1-20, or zero to indicate that the TG number
is not preassigned and is negotiated when the link is
activated.
If a preassigned TG number is defined, the
adj_cp_name parameter must also be defined, and the
adj_cp_type parameter must be set to either
AP_END_NODE or AP_NETWORK_NODE.
def_data.limited_resource
Specifies whether this link station is to be deactivated
when there are no sessions using the link. Link
stations on a nonswitched port cannot be configured as
limited resource. Possible values are:
AP_NO
The link is not a limited resource and
will not be deactivated automatically.
AP_NO_SESSIONS
The link is a limited resource and will
bedeactivatedautomatically when no
active sessions are using it.
AP_INACTIVITY
The link is a limited resource and will
bedeactivatedautomatically when no
active sessions are using it, or when