HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3268
For more information, see “Bit Ordering in MAC
Addresses”. If the two nodes are on the same LAN, or
on LANs of the same type connected by a bridge, no
change is required.
def_data.dest_address.lsap_address
Local SAP address of adjacent node.
For all link types:
def_data.auto_act_supp
Specifies whether the link can be activated
automatically when required by a session. Possible
values are:
AP_YES
The link can be activated
automatically.
AP_NO
The link cannot be activated
automatically.
If this parameter is set to AP_YES:
• The reactivation timer fields are ignored. If the LS
fails, SNAplus2 does not attempt to reactivate it
until a dependent LU application that was using
the session attempts to restart the session; an LS
used by independent LUs will not be reactivated by
SNAplus2, and must be restarted manually.
• If the link is to an APPN node, the LS must have a
preassigned TG number defined (see the following
parameter), and cp_cp_sess_support must be set
to AP_NO.
• If either the local node or the adjacent node is an
end node, the LS must also be defined as
auto-activatable at the adjacent node.
def_data.tg_number