HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3266
Back-level LEN node (one that does
not include the Network Name CV in
its XID3).
AP_HOST_XID3
Host node; SNAplus2 should respond
to a polling XID from the node with a
format 3 XID.
AP_HOST_XID0
Host node; SNAplus2 should respond
to a polling XID from the node with a
format 0 XID.
AP_DSPU_XID
Downstream PU; SNAplus2 should
include XID exchange in link
activation. The dspu_name and
dspu_services fields must also be
set.
AP_DSPU_NOXID
Downstream PU; SNAplus2 should
not include XID exchange in link
activation. The dspu_name and
dspu_services fields must also be
set.
If you want to run independent LU 6.2 traffic over this
LS, you must set the adj_cp_type parameter to
AP_APPN_NODE, AP_END_NODE, AP_NETWORK_NODE, or
AP_BACK_LEVEL_LEN_NODE.
def_data.dest_address.length
Length of the destination address field, as specified in
the following parameter or parameters.
For SDLC:
def_data.dest_address.address
Address of the secondary station on this LS.