HP-UX SNAplus2 NOF Programmer's Guide

NOF Indications
LOCAL_LU_INDICATION
Chapter 6 1141
significant only if the nau_address parameter is not
set to 0 (zero). If the nau_address parameter is set to
0, the pu_name parameter is set to all binary zeros.
lu_sscp_sess_active
Specifies whether the LU-SSCP session is active. If the
nau_address parameter is set to 0 (zero), this
parameter is reserved. Possible values are:
AP_YES
The LU-SSCP session is active.
AP_NO
The LU-SSCP session is not active.
lu_sscp_stats.rcv_ru_size
This parameter is always reserved.
lu_sscp_stats.send_ru_size
This parameter is always reserved.
lu_sscp_stats.max_send_btu_size
Maximum basic transmission unit (BTU) that can be
sent.
lu_sscp_stats.max_rcv_btu_size
Maximum basic transmission unit (BTU) that can be
received.
lu_sscp_stats.max_send_pac_win
This parameter is always set to zero.
lu_sscp_stats.cur_send_pac_win
This parameter is always set to zero.
lu_sscp_stats.max_rcv_pac_win
This parameter is always set to zero.
lu_sscp_stats.cur_rcv_pac_win
This parameter is always set to zero.
lu_sscp_stats.send_data_frames