HP-UX SNAplus2 NOF Programmer's Guide

NOF Indications
DLUR_PU_INDICATION
Chapter 61118
PU identifier defined in a DEFINE_INTERNAL_PU
verb or obtained in an XID from a downstream PU.
This value is a 4-byte hexadecimal string. Bits 0-11 are
set to the Block number and bits 12-31 are set to the ID
number that uniquely identifies the PU.
pu_location
Location of the PU. Possible values are:
AP_INTERNAL
The PU has been defined by a
DEFINE_INTERNAL_PU verb.
AP_DOWNSTREAM
The PU is located at a downstream
computer.
dlur_pu_detail.pu_status
Status of the PU, as seen by the DLUR. Possible values
are:
AP_RESET_NO_RETRY
The PU is in reset state and will not
be retried.
AP_RESET_RETRY
The PU is in reset state and will be
retried.
AP_PEND_ACTPU
The PU is waiting for an ACTPU
from the host.
AP_PEND_ACTPU_RSP
Having forwarded an ACTPU to the
PU, DLUR is now waiting for the PU
to respond to it.
AP_ACTIVE
The PU is active.
AP_PEND_DACTPU_RSP