HP-UX SNAplus2 NOF Programmer's Guide

NOF API Verbs (REGISTER_INDICATION_SINK to UNREGISTER_INDICATION_SINK)
SET_TN_SERVER_TRACE
Chapter 51060
SET_TN_SERVER_TRACE
This verb specifies tracing options for the SNAplus2 TN server
component.
This verb must be issued to a running node.
VCB Structure
typedef struct set_tn_server_trace
{
AP_UINT16 opcode; /* verb operation code */
unsigned char reserv2; /* reserved */
unsigned char format; /* reserved */
AP_UINT16 primary_rc; /* primary return code */
AP_UINT32 secondary_rc; /* secondary return code */
AP_UINT16 trace_flags; /* trace flags */
} SET_TN_SERVER_TRACE;
Supplied Parameters
The application supplies the following parameters:
opcode AP_SET_TN_SERVER_TRACE
trace_flags The types of tracing required. To turn off all tracing, or
to turn on tracing of all types, specify one of the
following values:
AP_TN_SERVER_NO_TRACE
No tracing.
AP_TN_SERVER_ALL_TRACE
Tracing of all types.
To activate tracing on specific message types, select one
or more values from the list below, combined using a
logical OR operation.
AP_TN_SERVER_TRC_TCP
TCP/IP interface tracing: messages
between TN server and TN3270
clients