HP-UX SNAplus2 MS Programmer's Guide

Management Services Verbs
TRANSFER_MS_DATA
Chapter 384
This optional parameter is an ASCII string of up to
eight characters, using any locally displayable
characters. Set the first character to 0x00 if you do not
want to include it.
pu_name
Destination physical unit for this NMVT. Set this to
one of the following:
A name of a PU
Specify an 8-byte type-A EBCDIC
string, padded to the right with
EBCDIC spaces (0x40).
Applications that use
TRANSFER_MS_DATA to respond to
NMVT_RECEIVED indications
should specify the pu_name received
in the NMVT_RECEIVED indication.
Applications that send unsolicited
alerts normally should not specify a
pu_name (they should set this
parameter to all binary zeros) unless
the application expressly wishes the
alert data to be sent to a specific
physical unit. In this case, the
pu_name must match a pu_name
specified on the definition of a link
station (LS); the NMVT is sent over
this link station. For more
information about defining an LS,
referto theSNAplus2Administration
Guide.
All binary zeros
To specify no pu_name . The data
contained in TRANSFER_MS_DATA
verbs that have the data_type
parameter set to SV_NMVT and all
binary zeros specified for the pu_name
parameter are sent over the default
PU session if it is available.