HP-UX SNAplus2 MS Programmer's Guide

Management Services Verbs
REGISTER_MS_APPLICATION
Chapter 3 63
AP_STATE_CHECK
secondary_rc
AP_INVALID_TARGET_STATE
The application issued this verb
while CONNECT_MS_NODE or
DISCONNECT_MS_NODE was
outstanding.
SNAplus2 Software Not Active If the verb does not execute because
the SNAplus2 software is not active, SNAplus2 returns the following
parameter:
primary_rc
One of the following:
AP_COMM_SUBSYSTEM_NOT_LOADED
The SNAplus2 software is not loaded.
AP_COMM_SUBSYSTEM_ABENDED
The SNAplus2 software has failed.
SNAplus2 does not return a secondary_rc when the SNAplus2 software
is not active.
MDS Support Not Configured If the verb does not execute because
the SNAplus2 configuration does not allow it, SNAplus2 returns the
following parameter:
primary_rc AP_FUNCTION_NOT_SUPPORTED
The SNAplus2 local node is not
configured to support MDS-level
network management applications.
Only NMVT-level applications can be
used.
SNAplus2 does not return a secondary_rc when it is not configured for
MDS-level support.
System Error If the verb does not execute because of a system error,
SNAplus2 returns the following parameters:
primary_rc AP_UNEXPECTED_SYSTEM_ERROR