HP-UX SNAplus2 Installation Guide (February 2007)

Installing SNAplus2
Overview
Chapter 220
Overview
This chapter begins the installation procedure. It describes the product
files for SNAplus2, gives some migration information, and introduces the
SMH SNAplus2 Installation Program.
The following flowchart shows the process from installation to
configuration.
NOTE If you have an older version of SNAplus2 (R6.x or prior) installed, you
must first un-install it. Please refer to the Upgrade Guide at
http://www.docs.hp.com/en/netcom.html#SNAplus2
for detailed instructions before going any further.