HP-UX SNAplus2 Installation Guide (February 2007)

Installation Requirements
HP SNAplus2 RJE Hardware and Software Requirements
Chapter 114
HP SNAplus2 RJE Hardware and Software
Requirements
This section describes the HP SNAplus2 RJE hardware and software
requirements for your HP 9000. This product is supported on HP-UX 11i
v3.
HP 9000 and HP Integrity Servers Hardware
Requirements for HP-UX 11i v3
HP SNAplus2 RJE requires the following HP 9000 hardware:
• HP 9000 servers rp(8400), rp(8420), rp(7420), rp(7410), rp(7405),
rp(4440), rp(4410), rp(3440), rp(3410), HP 9000 Superdome, and HP
Integrity servers rx(8640), rx(8620), rx(7640), rx(7620), rx(5670),
rx(4640), rx(3600), rx(6600), rx(2600), rx(2620), rx(1600), rx(1620),
cx(2600).
• 1.9 MB of disk space beyond the requirements of other applications
for a server.
Running HP SNAplus2 RJE in a client/server environment requires
additional LAN/9000 Link hardware components for servers including
the LAN interface card.
HP 9000 and HP Integrity Servers Software
Requirements for HP-UX 11i v3
HP SNAplus2 RJE requires the following HP 9000 software:
• To run on HP-UX 11i v3, the HP SNAplus2 Link requires the HP-UX
operating system 11i v3 to be installed.
Running HP SNAplus2 RJE in a client/server environment requires the
additional ARPA Services/9000 software for servers.
Running HP SNAplus2EE RJE using QLLC requires X.25 (J2793A)
software.
Running HP SNAplus2EE RJE using 802.3/Ethernet requires software
for each link type.