HP-UX SNAplus2 Diagnostics Guide

Using Logging and Tracing
Controlling Logging Using Command-Line Administration Program
Chapter 376
The message_number is returned by SNAplus2 in the header information
for the message and consists of two numbers separated by a hyphen (-).
The utility returns the name of the component that logged the message
and the information from the Message number , Cause type , Message
cause , and Message action fields as shown for verbose logging.
For example, to obtain further information about the succinct log
message shown in “Succinct Logging Message Format” (with component
ID and message number 4097 - 132), type the following command:
snaphelp 4097-132
The output from snaphelp is shown in “snaphelp Output”:
Example 3-3 snaphelp Output
CFG_DAEM Message: 4097 - 132, Cause Type: External
Cause: The config daemon could not start the port while
loading the node's
configuration. The node will be started, but the port will not
be started.
Action: Check for other logs which indicate why the port
failed to start.
Check that the DLC has been started.