HP-UX SNAplus2 Diagnostics Guide

Using Logging and Tracing
Controlling Logging Using Command-Line Administration Program
Chapter 372
Subcode
A unique identifier that indicates the point within
SNAplus2 at which the message was logged. This
subcode is used only by SNAplus2 support personnel.
Log category
The event category of the log message. Possible values
are Problem, Exception, or Audit.
Cause type
The cause of the message. Possible values are:
Internal
Internal error in a SNAplus2 component. Report errors
of this type to SNAplus2 support personnel.
System limit
An internal limiting value (for example, entries in a
fixed-size table) in the SNAplus2 software. There are
very few instances when this type of log occurs.
External
A cause external to SNAplus2 (such as a problem with
communication link hardware) or non-SNAplus2
software (such as communication link drivers).
Resource
Resource shortage (for example,insufficient memoryon
the HP-UX computer).
User
User error (for example, invalid parameters supplied
on the command line to a SNAplus2 program).
SNA
SNA protocol violation by a remote system, or
interoperability problem with another SNA
implementation.
Config
Error in the SNAplus2 configuration, or mismatch
between the SNAplus2 configuration and the remote