HP-UX SNAplus2 Diagnostics Guide

Using snapfilter and snaptrcfmt
Filtering Internal Tracing
Appendix A106
session; you cannot filter on messages in a single
direction only. For example, if messages flowing from
the node have OAF = 01, DAF = 02, and ODAI = 1,
messages flowing to the node on the same session will
have OAF = 02, DAF = 01, and ODAI = 1. Specifying
+lfsid 01021 includes messages flowing in both
directions on this session.
You can use both of the options +lfsid and -lfsid .
-lfsid aabbc
Exclude DLC messages with the specified LFSID.
You can use both of the options +lfsid and -lfsid .
For example, to include all messages with DAF 0x0a
except those with OAF 0x0b, specify +lfsid xx0ax
-lfsid 0bxxx .
+npid XXXXXXXX
Include node and SDLC messages with the specified
component instance ID (in hexadecimal); exclude other
node and SDLC messages. This option has no effect on
messages other than node and SDLC messages.
The component instance ID is a SNAplus2 internal
identifier that distinguishes between different users or
programs using the same component. To specify more
than one component instance ID, separate them with
commas.
Do not specify both +npid and -npid .
-npid XXXXXXXX
Exclude node and SDLC messages with the specified
component instance ID (in hexadecimal).
Do not specify both +npid and -npid .
-start yymmddhhmmss
Include only messages traced after the specified date
(year, month, day) and time (hours, minutes, seconds).
For example, 3:45 p.m. (15.45) on 11 August 1997 is
970811154500.
You can specify both -start and -end to include