Configuring SNAplus2 for Enterprise Extender
Table Of Contents
Configuring SNAplus2 for Enterprise Extender White Paper 22
3. D NET,ID=PU3270,E
D NET, ID=PU3270, E shows a display of the Physical Unit used for Enterprise
Extender.
D NET, ID=PU3270, E
IST097I DISPLAY ACCEPTED
IST075I NAME = PU33270, TYPE = PU_T2.1 643
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST1043I CP NAME = HISERVER, CP NETID = APPN, DYNAMIC LU = YES
IST1589I XNETALS = YES
IST1105I RESOURCE STATUS TGN CP-CP TG CHARACTERISTICS
IST1106I PU3270 AC/R 22 YES 98750000000000000000017100808080
IST1482I HPR = RTP - OVERRIDE = N/A - CONNECTION = YES
IST1510I LLERP = NOTPREF - RECEIVED = NOTALLOW
IST1680I LOCAL IP ADDRESS 172.168.1.2
IST1680I REMOTE IP ADDRESS 172.168.1.3
IST136I SWITCHED SNA MAJOR NODE = TOKEN01
IST081I LINE NAME = L0000000, LINE GROUP = EEGROUP, MAJNOD = XCA
You should verify that:
PU_T2.1 The link station is a PU type 2.1, APPN connection between the
NNs.
TGN CP-CP The lin
k station is in the APPN topology database CP-CP
HPR=RTP. The level of HPR supported is RTP and the status of the
conne
ction.
LOCAL IP ADDRESS 17
2.168.1.2 is the VIPA address of the TCP/IP
stack being used by this VTAM.
REMOTE IP ADDRESS 1
72.168.1.3 is the VIPA address of the remote
NN.