Configuring SNAplus2 for Enterprise Extender
Table Of Contents
Configuring SNAplus2 for Enterprise Extender White Paper 15
GATEWAY
;
; Direct Routes - Routes that are directly connected to my
interfaces.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet
Value
172.19 = P390 1500 0
172.20 = P390X 1500 0
; 9 = ETH1 1500 0.255.255.0 0.117.56.0
; 130.50 = TR1 2000 0.0.255.0 0.0.10.0
; 193.5.2 = ETH1 1500 0
; 9 = FDDI1 4000 0.255.255.0 0.67.43.0
; 193.7.2.2 = SNA1 2000 HOST
;
; Indirect Routes - Routes that are reachable through routers on my
; network.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet
Value
defaultnet 172.19.2.55 P390 defaultsize 0
; defaultnet 9.117.56.251 ETH1 defaultsize 0
; 193.12.2 130.50.10.1 TR1 2000 0
; 10.5.6.4 193.5.2.10 ETH1 1500 HOST
;
; Default Route - All packets to an unknown destination are routed
; through this route.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet Value
; DEFAULTNET 9.67.43.1 FDDI1 DEFAULTSIZE 0
;
; -------------------------------------------------------------------
;
; orouted Routing Information
;
; if you are using orouted, comment out the GATEWAY statement and
; update the BSDROUTINGPARMS statement to reflect your installation
; configuration and remove the semicolon
;
; Link Maxmtu Metric Subnet Mask Dest Addr
; BSDROUTINGPARMS false
; TR1 2000 0 255.255.255.0 0
; ETH1 1500 0 255.255.255.0 0
; FDDI1 DEFAULTSIZE 0 255.255.255.0 0
; ENDBSDROUTINGPARMS
;
; -------------------------------------------------------------------
;
; Use TRANSLATE to specify the hardware address of a specific IP
; address. See the Customization and Administration Guide for more
; information.
;