ACC SNAplus2 Link Software User's Guide

Chapter 2 29
Software Installation and Verification
Installation Verification
Step 3. Make the following selections under “Connectivity” in the “New Port”
window:
Port using: ACC SDLC card
SNA port name: SDLCP1
ACC SDLC card number: 0
Port number: 1
Initially active: depressed (red)
Line details:
Type: Leased line
Link role: Primary
Encoding: NRZ
Duplex setting: Half duplex
Step 4. Make the following selections under “Connectivity” in the “New link
station” window:
Add link station to: SDLCP0
Name: SDLCL0
SNA port name: SDLCP0
Activation: By administrator
LU traffic: Dependent only
Local node ID: 05F FFFFF
Remote node ID: <blank> <blank>
Contact information:
Poll address: C1
Click on the “Advanced...” button. Select the following:
Max send BTU size: 265 (should be the default)
Host type: SNA
Send format 3 XID: depressed (red)
Don’t send local node name: depressed (red)
Reactivate link station after failure: not depressed (grey)