HP-UX Reference (11i v3 07/02) - 7 Device (Special) Files, 9 General Information, Index (vol 10)

s
scsimgr_estape(7) scsimgr_estape(7)
Values:
0 (disabled),
1 (enabled).
Timeout for all commands not referenced below.
Default: 30.
LUN default_secs RW uint32
Timeout for the space command.
Default: 1200.
space_secs RW uint32
Timeout for the write command.
Default: 600.
write_secs RW uint32
Timeout for the read command.
Default: 600.
read_secs RW uint32
Timeout for the unload command.
Default: 600.
unload_secs RW uint32
Timeout for the rewind command.
Default: 600.
rewind_secs RW uint32
Timeout for the erase command.
Default: 18000.
erase_secs RW uint32
The type of device a particular LUN is associ-
ated with.
Default: 0.
Values:
0 = unknown,
5 = HPIB 9-track,
6 = DDS1,
7 = All other DDS/DAT,
8 = SCSI 9-track,
9 = QIC,
10 = 8mm,
11 = IBM 3480, STK 9XXX, STK T10000,
12 = Quantum DLT,
13 = Sony AIT,
14 = IBM 3590,
15 = LTO.
mt_type RW uint32
default_blocksize Default blocksize.
Default: 0.
Values:
0 = variable, overridden by a custom DSF.
RW uint32
Default immediate reporting.
Default: 1.
Values:
0 (disabled),
1 (enabled).
default_ir RW uint32
Number of filemarks to indicate End of Data.
Default: 2.
close_marks RW uint32
num_partitions
_supp
Number of partitions supported
Default: 1.
Range: 1+
RW uint32
Driver characteristics bitwise ORed together
Default: 0.
Values:
1 = Device supports setmarks,
2 = Logpage 31 contains capacity information,
4 = Logpage 38 contains capacity information,
8 = Device supports Reserve/Release.
characteristics RW uint64
176 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: February 2007