HP-UX Reference (11i v3 07/02) - 5 Miscellaneous Topics (vol 9)

s
sd(5) sd(5)
Target Log
A swagent process performs the actual swacl,
swconfig, swcopy, swinstall, swremove,
and
swverify operation at each target_selection. For operations on target root objects, the
swagent logs messages to the file var/adm/sw/swagent.log
beneath the root directory (e.g.
/ or an alternate root directory). For operations on target depot objects, the
swagent logs mes-
sages to the file
swagent.log beneath the depot directory (e.g.
/var/spool/sw).
The
swagentd running on a host logs events to the file
/var/adm/sw/swagentd.log
.
Source Depot Audit Log
If both source and target machine are updated to SD revision B11.00 or later, the system administra-
tor at the source depot machine can track which user pulls which software from a depot on the source
machine and when the software is pulled. Refer to the
source_depot_audit
option in
swagent(1M) for more information.
FILES
/dev/rmt/0m
Default source tape location. (Note that SD can read both
tar and cpio tape depots.)
/etc/fstab
List of volumes that should be mounted.
$HOME/.swdefaults
Contains the user-specific default values for some or all SD options. If this file does not exist, SD
looks for user-specific defaults in $HOME/.sw/defaults
.
$HOME/.sw/defaults.hosts
Contains the user-specific default list of hosts to manage.
$HOME/.sw/defaults.patchfilters
Contains the user-specific default list of patch filters.
$HOME/.sw/sessions/
Contains session files automatically saved by the SD commands, or explicitly saved by the user.
$HOME/.sw/software/
Contains software files explicitly saved by the user.
$HOME/.sw/targets/
Contains target files explicitly saved by the user.
/usr/lbin/swagent
The SD agent.
/usr/lib/nls/$LANG/sw*.cat
The SD message catalogs.
/usr/lib/sw/help/
The directory which contains the help files used by the SD GUIs’ on-line help facility.
/usr/lib/sw/sys.defaults
Contains the master list of current SD options (with their default values).
/usr/lib/sw/ui/
The directory which contains the description files used by the SD Graphical User Interfaces (GUIs).
/usr/newconfig/var/adm/sw/
The directory containing the configurable data shipped for the SD product, which is conditionally
copied into /var/adm/sw/ based on the existing configuration.
/usr/sbin/sw*
The SD commands.
/var/adm/sw/
The directory which contains all of the configurable (and non-configurable) data for SD. This directory
is also the default location of log files.
/var/adm/sw/defaults
Contains the active system-wide default values for some or all SD options.
/var/adm/sw/defaults.hosts
Contains the system-wide default list of hosts to manage.
HP-UX 11i Version 3: February 2007 − 31 − Hewlett-Packard Company 451