HP-UX Reference (11i v3 07/02) - 5 Miscellaneous Topics (vol 9)

s
sd(5) sd(5)
Applies to swcopy.
register_new_depot=true
Causes swcopy to register a newly created depot with the local
swagentd. This action
allows other SD commands to automatically "see" this depot. If set to
false, a new depot
will not be automatically registered. (It can be registered later with the
swreg
com-
mand.)
Applies to
swcopy.
register_new_root=true
Causes swinstall to register a newly created alternate root with the local
swagentd.
This action allows other SD commands to automatically "see" this root. If set to
false,a
new root will not be automatically registered. (It can be registered later with the
swreg
command.)
Applies to swinstall.
reinstall=false
This option prevents SD from re-installing (overwriting) an existing revision of a fileset. If
set to
true, the fileset will be overwritten.
Applies to swinstall.
reinstall_files=false
Controls the overwriting of files, which may enhance performance on slow networks or
disks. At the default value of false, SD compares each file in a source fileset to correspond-
ing files on the target system. SD compares the files based on size, timestamp, and (option-
ally) the checksum (see reinstall_files_use_cksum
). If the files are identical the
files on the target system are not overwritten.
When set to true, SD does not compare files and overwrites any identical files on the target.
Applies to
swinstall, swcopy, and swpackage.
reinstall_files_use_cksum=true
(For swpackage, the default value for this option is false.) Controls the use of check-
sum comparisons when the
reinstall_files
option is set to false. At the default
value of true, this option causes SD to compute and compare checksums to determine if a
new file should overwrite an old file. Use of checksums slows the comparison but is a more
robust check for equivalency than size and time stamp.
If set to false, SD does not compute checksums and compares files only by size and times-
tamp.
Applies to
swcopy, swinstall, and swpackage.
remove_empty_depot=true
Remove an empty depot when the last product is removed. If set to false, an empty
depot will not be removed, preserving any depot ACLs.
Applies to swremove.
remove_obsolete_filesets=false
Controls whether swcopy automatically removes obsolete filesets from target products in
the target depot. If set to true, swcopy removes obsolete filesets from the target pro-
ducts that were written to during the copy process. Removal occurs after the copy is com-
plete. Filesets are defined as obsolete if they were not part of the most recent packaging of
the product residing on the source depot.
Applies to swcopy.
remove_setup_cmd=/usr/lbin/sw/remove_setup
Defines the script called by the agent to perform release-specific removal preparation. For
an OS update, this script invokes the tlink command when a fileset is removed.
Applies to swagentd.
Please Note: Transition links do not exist on 11.31 and newer releases so there are no
remove preparation steps to perform therefore the remove_setup_cmd is never executed for
these releases.
442 Hewlett-Packard Company − 22 − HP-UX 11i Version 3: February 2007