HP-UX Reference (11i v3 07/02) - 4 File Formats (vol 8)
s
snmpd.conf(4) snmpd.conf(4)
configuration file will be localSNMPID.
usmUserName is user name in ASCII text.
usmUserAuthProtocol is the Authentication Protocol used for sending and receiving messages, on
behalf of this SNMP engine. Currently supported values are usmNoAuth-
Protocol and usmHMACMD5AuthProtocol.
usmUserPrivProtocol is the Privacy protocol used for sending and receiving messages, on behalf
of SNMP engine. Currently, no protocol is supported.
Default value is the OID for the usmUserPrivProtocol, i.e.,
.1.3.6.1.6.3.10.1.2.1
.
usmUserStorageType is
nonVolatile , permanent ,or
readOnly.
usmTargetTag is ASCII text used for source address checking. It is used for selecting a set
of entries from
snmpTargetAddrTable
. The value will be "-" if source
address checking is not required.
When the TAG is
vacmSecurityToGroupEntry
, the format of the VALUE clause is as follows:
vacmSecurityModel vacmSecurityName vacmGroupName vacmSecurityToGroupStorageType
where:
vacmSecurityModel is
snmpv1 for SNMPv1, snmpv2c for SNMPv2c and usm for SNMPv3.
vacmSecurityName is the ASCII string which is ’principal’ (SNMPv3 user or SNMPv1/ SNMPv2 com-
munity string).
vacmGroupName is the ASCII text defining the group name. This group name must be defined by
at least one
vacmAccessEntry
.
vacmSecurityToGroupStorageType
is
nonVolatile , permanent ,orreadOnly.
When the TAG is vacmAccessEntry
the format of the VALUE clause is as follows:
vacmGroupName vacmAccessContextPrefix vacmAccessSecurityModel
vacmAccessSecurityLevel vacmAccessContextMatch vacmAccessReadViewName
vacmAccessWriteViewName vacmAccessNotifyViewName vacmAccessStorageType
where:
vacmGroupName is ASCII text representing group name.
vacmAccessContextPrefix is ASCII string used to match the context name in the manangement
request, either partially or completely. A dash "-" represents default con-
text.
vacmAccessSecurityModel
is
snmpv1 for SNMPv1, snmpv2c for SNMPv2c and
usm for SNMPv3.
vacmAccessSecurityLevel is the level of authentication and privacy. Presently supported values are
noAuthNoPriv , for no authentication no privacy, authNoPriv for
Authentication and no privacy.
vacmAccessContextMatch is exact or prefix to indicate how the context of the request must
match vacmAccessContextPrefix.
vacmAccessReadViewName
is used for defining view subtrees for Get request. It should be defined by
at least one vacmViewTreeFamilyEntry.
vacmAccessWriteViewName
is used for defining view subtrees for Set requests. It should be defined by
at least one vacmViewTreeFamilyEntry.
vacmAccessNotifyViewName
is used for defining view subtrees from which objects may be included as
VarBinds in the Trap messages and Inform requests. It should be defined
by at least one vacmViewTreeFamilyEntry.
432 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: February 2007