HP-UX Reference (11i v3 07/02) - 4 File Formats (vol 8)

p
pppoerd.conf(4) pppoerd.conf(4)
NAME
pppoerd.conf - PPPoE (Point to Point Protocol over Ethernet) relay configuration file
DESCRIPTION
pppoerd.conf is the configuration file for the
pppoerd daemon. This file is read by pppoerd to ini-
tailize the relay. The default file is
/etc/ppp/pppoerd.conf
. Note that, you cannot run pppoerd
without this configuration file. Each entry in the
pppoerd.conf file is separated by a new line. Blank
lines and lines that begin with
#
are ignored.
Parameters
pppoerd.conf contains the following parameters:
server-intf Specify the name of the server interface; e,g.:
lan0.
client-intf-list
Specify a list of one or more client interface names.
Sample pppoerd.conf File
server-intf=lan4
client-intf-list=lan2 lan0
AUTHOR
pppoerd.conf was developed by Hewlett-Packard.
FILES
pppoesd PPPoE server daemon
pppoerd PPPoE relay
pppoec PPPoE client
pppd PPP daemon
SEE ALSO
pppd(1), pppoec(1), pppoerd(1M), pppoesd(1M).
HP-UX 11i Version 3: February 2007 − 1 − Hewlett-Packard Company 327