HP-UX Reference (11i v3 07/02) - 1M System Administration Commands N-Z (vol 4)

s
swinstall(1M) swinstall(1M)
EXAMPLES
swinstall
To invoke an interactive session of swinstall
:
swinstall
Select the C and Pascal products from the network source software server (sw_server) and start an interac-
tive session:
swinstall -i -s sw_server cc pascal
Install the C and Pascal products to a set of remote hosts:
swinstall -s sw_server cc pascal @ hostA hostB hostC
Update the HP Omniback product from a CD-ROM mounted at
/cd:
swinstall -s /cd/swmedia Omniback
Install an incompatible version of HP Omniback into the directory
/exports:
swinstall -x allow_incompatible=true -s/products Omniback,a=arch \
@ /exports
Install all products from the cartridge tape /dev/rmt/0 :
swinstall -s /dev/rmt/0 \*
Reinstall the software_selections listed in the file
/tmp/install.products on the hosts listed in the
file
tmp/install.hosts:
swinstall -x reinstall=true -f/tmp/install.products \
-t/tmp/install.hosts
Execute swinstall interactively using the session file
/tmp/case.selections as a basis:
swinstall -i -S /tmp/case.selections
Install all the software from local depot /tmp/sample.depot.1
, using any response files generated by
request scripts:
swinstall -s /tmp/sample.depot.1 -x ask=true \*
Install Product1 from remote depot /tmp/sample.depot.1
on host swposix and use an exist-
ing response file (previously generated by the
swask command) located in /tmp/bar.depot
:
swinstall -s swposix:/tmp/sample.depot.1 -c /tmp/bar.depot Product1
Install all products in remote depot /tmp/sample.depot.1
on host swposix, use any response files
generated by request scripts, create catalog
/tmp/bar.depot
and copy all response files to the new
catalog:
swinstall -s swposix:/tmp/sample.depot.1 -c /tmp/bar.depot \
-x ask=true \*
Install all products in remote depot /tmp/sample.depot.1 on host swposix
, use response files,
run request scripts only when a response file is absent, create catalog
/tmp/bar.depot and copy all
response files to the new catalog:
swinstall -s swposix:/tmp/sample.depot.1 -c swposix:/tmp/bar.depot \
-x ask=as_needed \*
Install all patches in the depot that correspond to currently installed software and are of the critical
category:
swinstall -s /tmp/sample.depot.1 -x patch_match_target=true \
-x patch_filter=\"*.*, c=critical\"
The following example applies to HP-UX 10.X only.
To linkinstall the product TEST to the clients clientA, clientB from the server:
swinstall -l -r -s :OS_700 TEST @ clientA clientB
The following example applies to HP-UX 10.X only.
480 Hewlett-Packard Company − 20 − HP-UX 11i Version 3: February 2007