HP-UX Reference (11i v3 07/02) - 1M System Administration Commands N-Z (vol 4)

s
sar(1M) sar(1M)
device Logical name of the tape device and its corresponding instance.
%busy Portion of time the device was busy servicing a request.
r/s Number of reads per second from the device.
w/s Number of writes per second to the device.
read Number of bytes read (in MBs) from the device.
write Number of bytes written (in MBs) to the device.
avserv Average time (in milliseconds) to service each transfer request (includes
seek, rotational latency, and data transfer times) for the device.
-u Report CPU utilization (the default); portion of time running in one of several modes. On a
multi-processor system, if the
-M option is used together with the
-u option, per-CPU utiliza-
tion as well as the average CPU utilization of all the active processors are reported. If the
-M
option is not used, only the average CPU utilization of all the active processors is reported. On
a multi-processor ProcessorSet (pset) configured system, if the
-P option is used together with
the
-M and -u options, the column for pset mapping to processor will be displayed before the
cpu column.
pset pset id (only on a multi-processor pset configured system with the
-P , -M
and -u option).
cpu cpu number (only on a multi-processor system with the
-M option).
%usr user mode.
%sys system mode.
%wio idle with some process waiting for I/O (only block I/O, raw I/O, or VM
pageins/swapins indicated).
%idle otherwise idle.
-v Report status of text, process, inode and file tables:
text-sz (Not Applicable).
proc-sz The current-size and maximum-size of the process table.
inod-sz The current-size and maximum-size of the inode table (inode cache).
file-sz The current-size and maximum-size of the system file table.
text-ov (Not Applicable).
proc-ov The number of times the process table overflowed (number of times the
kernel could not find any available process table entries) between sample
points.
inod-ov The number of times the inode table (inode cache) overflowed (number of
times the kernel could not find any available inode table entries) between
sample points.
file-ov The number of times the system file table overflowed (number of times the
kernel could not find any available file table entries) between sample
points.
-w Report system swapping and switching activity:
swpin/s Number of process swapins per second.
swpot/s Number of process swapouts per second.
bswin/s Number of 512-byte units transferred for swapins per second.
bswot/s Number of 512-byte units transferred for swapouts per second.
pswch/s Number of process context switches per second.
-y Report tty device activity:
rawch/s Raw input characters per second.
300 Hewlett-Packard Company − 4 − HP-UX 11i Version 3: February 2007