HP-UX Reference (11i v3 07/02) - 1M System Administration Commands A-M (vol 3)

l
lanadmin(1M) lanadmin(1M)
(TO BE OBSOLETED)
LAN Interface Test Mode Menu
The following commands are available:
clear Clear the LAN interface network statistics registers to zero. You must be a
privileged user.
display Display the RFC 1213 MIB II statistics. Depending on the link, the type-specific
MIB statistics may also be displayed. For instance, for Ethernet links, the RFC 1398
Ethernet-like statistics are displayed.
end Return lanadmin to Test Selection Mode.
menu Display the LAN Interface Test Mode command menu.
ppa Prompt for a PPA that corresponds to a LAN interface card. It defaults to the first
LAN interface encountered in an internal list. Appropriate values can be displayed
with the
lanscan command (see lanscan(1M)).
quit Terminate the
lanadmin program.
reset Reset the local LAN interface card, causing it to execute its self-test. Local access to
the network is interrupted during execution of reset. You must be a privileged
user.
specific Display and execute commands from a driver specific menu.
Arguments
lanadmin recognizes the following Immediate Mode argument.
PPA The Physical Point of Attachment (PPA) number of the LAN interface. This argument
is ignored if none of the aAcgmMprRsSVxX
options are used (Menu Mode). Any
options specified after PPA are ignored. Appropriate values can be displayed with the
lanscan command (see lanscan(1M)).
WARNINGS
Changes made to an interface’s station address or mtu with the
lanadmin command will not be preserved
between system reboots. A user must modify the initialization configuration files for this feature, either
manually editing configuration files or through the
SAM interface.
Obsolescence
The lanadmin , lanscan, and linkloop commands are deprecated. These commands will be removed
in a future HP-UX release. HP recommends the use of replacement command nwmgr(1M) to perform all
network interface-related tasks.
AUTHOR
lanadmin was developed by HP.
SEE ALSO
netstat(1), ifconfig(1M), lanscan(1M), linkloop(1M), nwmgr(1M), ping(1M), lan(7), vlan(7).
IETF Requests for Comments: RFC 1213, RFC 1398, RFC 2863.
HP-UX 11i Version 3: February 2007 − 3 − Hewlett-Packard Company 423