HP-UX Reference (11i v3 07/02) - 1M System Administration Commands A-M (vol 3)

i
ioscan(1M) ioscan(1M)
module path The software components separated by periods (
.).
module name The module name of the software component controlling the node.
software state The result of software binding.
CLAIMED software bound successfully
UNCLAIMED no associated software found
UNUSABLE the hardware at this address is no longer usable due to some irrecover-
able error condition; a system reboot may clear this condition
SUSPENDED associated software and hardware are in suspended state
DIFF_HW software found does not match the associated software
NO_HW the hardware at this address is no longer responding
ERROR the hardware at this address is responding but is in an error state
SCAN a scan operation is in progress for this node
hardware type Entity identifier for the hardware component. It is one of the following strings:
UNKNOWN there is no hardware associated or the type of hardware is unknown
PROCESSOR hardware component is a processor
MEMORY hardware component is memory
BUS_NEXUS hardware component is bus converter or bus adapter
VIRTBUS hardware component is a virtual (software controlled) bus
INTERFACE hardware component is an interface card
DEVICE hardware component is a device
TGT_PATH hardware component is a target path
LUN_PATH hardware component is a LUN path
description A description of the device.
card instance The instance number of the hardware interface card.
EFI device path or PA device path
On Integrity servers hardware, this field contains the EFI device path. On PA-RISC
hardware, this field contains the PA device path in both hexadecimal and decimal format
separated by a comma ,.
health State of the node as defined by the subsystem that manages this node (for example, a
driver). It is one of the following strings:
online node is online and functional
offline node has gone offline and is inaccessible
limited node is online but performance is degraded due to some links, paths, and
connections being offline
unusable an error condition occurred which requires manual intervention (for
example, authentication failure, hardware failure, and so on)
testing node is being diagnosed
disabled node has been disabled or suspended
standby node is functional but not in use (standby node)
RETURN VALUE
ioscan returns:
0 upon normal completion
1 if an error occurred
2 if the driver does not support the functionality.
HP-UX 11i Version 3: February 2007 − 5 − Hewlett-Packard Company 377