HP-UX Reference (11i v3 07/02) - 1M System Administration Commands A-M (vol 3)

f
fcmsutil(1M) fcmsutil(1M)
NAME
fcmsutil - Fibre Channel Mass Storage Utility Command for TACHYON TL, TACHYON XL2, FCD Driver-
Based and FC/GigE Combo Fibre Channel Host Bus Adapters
SYNOPSIS
/opt/fcms/bin/fcmsutil
device_file
/opt/fcms/bin/fcmsutil
device_file
vpd
/opt/fcms/bin/fcmsutil
device_file
echo remote-N-Port-ID [data-size][count]
/opt/fcms/bin/fcmsutil
device_file
rls remote-N-Port-ID
/opt/fcms/bin/fcmsutil
device_file
test remote-N-Port-ID [data-size][count]
/opt/fcms/bin/fcmsutil
device_file
read offset [pci]
/opt/fcms/bin/fcmsutil
device_file
write offset value [pci]
/opt/fcms/bin/fcmsutil
device_file [
-f] lb [plm|crpat|cjtpat][count]
/opt/fcms/bin/fcmsutil
device_file get {local|fabric}
/opt/fcms/bin/fcmsutil
device_file get remote {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file get_lgn N-Port-ID
/opt/fcms/bin/fcmsutil
device_file [-f] reset
/opt/fcms/bin/fcmsutil
device_file [-f] bdr target-device_file
/opt/fcms/bin/fcmsutil
device_file read_cr
/opt/fcms/bin/fcmsutil
device_file lgninfo_all
/opt/fcms/bin/fcmsutil
device_file stat [-s]
/opt/fcms/bin/fcmsutil
device_file clear_stat
/opt/fcms/bin/fcmsutil
device_file nsstat
/opt/fcms/bin/fcmsutil
device_file clear_nsstat
/opt/fcms/bin/fcmsutil
device_file devstat {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file clear_devstat {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file [-f] disable
/opt/fcms/bin/fcmsutil
device_file enable
/opt/fcms/bin/fcmsutil
device_file [-k] ns_query_ports
/opt/fcms/bin/fcmsutil
device_file [-f] dump_current_state
/opt/fcms/bin/fcmsutil
device_file dump_saved_state
/opt/fcms/bin/fcmsutil
device_file dump_nvram
/opt/fcms/bin/fcmsutil
device_file rom_fw_update
ROM_Firmware_file
/opt/fcms/bin/fcmsutil device_file efi_drv_update
EFI_Driver_file
/opt/fcms/bin/fcmsutil device_file [-f] set_int_delay
{off |[-z {5|6}] value}
/opt/fcms/bin/fcmsutil device_file get_int_delay
Obsolescent Option
/opt/fcms/bin/fcmsutil device_file replace_dsk remote-N-Port-ID
Note
For the TACHYON TL and XL2, FCD Driver-Based and FC/GigE Combo cards, remote-N-Port-ID
can be replaced with -l loop_id (in Private Loop), or -w wwn for all options that take remote-
N-Port-ID as an argument. The devstat all option displays the loop_id (in Private Loop) and
the nport_id (in Fabric) along with the statistics for all N_Ports the initiator was able to communi-
cate with.
HP-UX 11i Version 3: February 2007 − 1 − Hewlett-Packard Company 213