HP-UX Reference (11i v3 07/02) - 1 User Commands N-Z (vol 2)

parstatus(1) parstatus(1)

[Partition]

Par # of # of I/O

Num Status Cells Chassis Core cell Partition Name (first 30 chars)

=== ============ ===== ======== ========== ===============================

0 Active 2 1 cab0,cell0 cup2000

1 Active 3 2 cab0,cell6 cup2006

2 Active 2 1 cab0,cell4 cup2004

[Partition - Multithread]

Par Num Multithreading Enabled

======= ======================

0no

1no

2no

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and some of its conﬁguration

settings. If you encounter connection errors when using the

-u option, check that the following two condi-

tions are satisﬁed:

• Use the cimconfig command (see cimconﬁg(1M) in the WBEM product documentation) to verify (and

correct if necessary) the setting of the following two variables:

• enableRemotePrivilegedUserAccess=true

• enableHttpsConnection=true

• The target partition’s digital certiﬁcate has been appended to the local partition’s Shared Authentication

Store. For the nPartition commands, the Shared Authentication Store is stored in the ﬁle:

/etc/opt/hp/sslshare/known_hosts.pem

. This ﬁle is used by all the clients, which use SSL

based certiﬁcates. If these clients trust a target partition, then the nPartition commands will also trust

the target partition.

Refer to the WBEM documents speciﬁed in the SEE ALSO section below for further information.

AUTHOR

parstatus was developed by the Hewlett-Packard Company.