HP-UX Reference (11i v3 07/02) - 1 User Commands N-Z (vol 2)

p
parstatus(1) parstatus(1)
NAME
parstatus - display information about a hardware partitionable complex
SYNOPSIS
parstatus
[[-u username [:
] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -s
[[-u username [:
] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -w [-M]
[ -u username [:] -h
IPaddress|hostname ]
parstatus -X
[[-u username [:
] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -C|-I [-A][-M]
[[-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -B|-P [-M]
[[-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -i I/Ochassis [-i I/Ochassis]... [-M]
[[-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -c cell [-c cell]... [-V|-M]
[[-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -b cabinet [-b cabinet]... [-V|-M]
[[
-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -p PartitionNumber [
-p PartitionNumber]... [-V|-M]
[[
-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -T
[[-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
DESCRIPTION
The
parstatus command displays information about a system complex. If no arguments are supplied,
all major components that are physically present in the local complex are listed. A specific component (cell,
I/O chassis, cabinet, or partition) may be specified in order to restrict the output to information about that
component. Either the -u option or the -g option can be specified to access a remote complex.
Refer to the nPartition Administrator’s Guide for a description of the partition management terms used in
this man page.
Options and Arguments
parstatus recognizes the following command line options and arguments:
-A Only display the available resources in the complex. If the -A option is used with other
options, an error occurs except when the -A option is used with its related options.
-B Show information for all cabinets in the complex.
-b cabinet Show information about the specified cabinet.
-C Show information for all cells in the complex.
-c cell Show information about the specified cell. The cell id can be specified either in the local
(cabinet#/slot#) or global (cell_ID) format. For example, the cell located in cabinet 0,
HP-UX 11i Version 3: February 2007 − 1 − Hewlett-Packard Company 83