HP-UX Reference (11i v3 07/02) - 1 User Commands A-M (vol 1)

l
lifcp(1) lifcp(1)
Copy standard input to LIF file
A_FILE on LIF volume /dev/dsk/c0t6d0
.
lifcp - /dev/dsk/c0t6d0:A_FILE
Copy LIF file ABC in lifvol to LIF file
CDE on /dev/dsk/c0t6d0 .
lifcp lifvol:ABC /dev/dsk/c0t6d0:CDE
Copy the output of pr to the LIF file
ABC.
pr abc | lifcp - lifvol:ABC
Copy the output of pr to the LIF volume
lifvol. LIF file STDIN is created since no file names are
specified.
pr abc | lifcp - lifvol:
Copy LIF file ABC in lifvol
to standard output.
lifcp lifvol:ABC -
Copy all files in current directory to LIF files of the same name on LIF volume
lifvol (may cause errors
if file names in the current directory do not obey LIF naming conventions!).
lifcp * ../lifvol:
DEPENDENCIES
Series 700/800
The following option is also supported:
-Knnn forces each file copied in to begin on an nnn × 1024-byte boundary from the beginning of the
volume. This is useful when files are used for Series 700/800 boot media. This option has
no effect when copying from a LIF volume.
AUTHOR
lifcp was developed by the Hewlett-Packard Company.
SEE ALSO
lifinit(1), lifls(1), lifrename(1), lifrm(1), lif(4).
572 Hewlett-Packard Company 3 HP-UX 11i Version 3: February 2007