HP-UX Reference (11i v3 07/02) - 1 User Commands A-M (vol 1)

e
evweb_subscribe(1) evweb_subscribe(1)
0 Unknown
1 Normal
2 Other
3 Information
4 Warning
5 Minor
6 Major
7 Critical
Use a colon (:) to separate an operator and a severity level. Use a comma (
,) to separate two
severity levels. You can also use a space to separate an operator and a severity level. However,
in this case, you should enclose the operator and severity values within double quotes. You can
specify only one
-e switch in a command. Following are the examples of the
-e
option:
•
-e ne:2
• -e bw:2,5
• -e "bw 2,5"
• -e eq:4
• -e "eq 4"
• -e 4
-E
Lists details of an event subscription. Use
-n subscription_name with this option. The -n
switch is mandatory. Following are the examples of the
-E option:
•
evweb subscribe -E -n my_subscription_1
• evweb subscribe -E -h
-f
Forces the command without asking for a confirmation. You can use this switch only with the
-D option. Following are the examples of the
-f option:
•
evweb subscribe -D -n my_subs_1 -f
-h
Displays how to use the evweb subscribe [-L|-E|-C|-M|-D
] command. Following are
the examples of the
-h option:
• evweb subscribe -h
-i
Event_ID
Specifies an EventID. Use this option as a part of the subscription criteria. You cannot use this
switch more than once in a command. Following are the examples of the
-i option:
•
-i 10608
-L
Lists a summary of event subscriptions. Use
-b[internal|external] with this option. Fol-
lowing are the examples of the
-L option:
• evweb subscribe -L -b
• evweb subscribe -L -b internal
• evweb subscribe -L -b external
• evweb subscribe -L -h
-M
Modifies a subscription. The following switches can be used along with this option:
• -n subscription_name
• -e [eq|ne|le|ge|bw]:severity_level1[,severity_level2
]
• -v [event_category]
• -i Event_ID
• -t [archive|syslog|email][handler_properties]
•
-r
• -h
The -n switch is mandatory.
• If the destinations are not specified with this option, then the behavior depends on the usage
of -r option. For more information, see the description of the -r option.
• If both the subscription criteria and the destination are specified, both of them are updated.
• If the destination is specified but not the subscription criteria, the destination is updated and
the original subscription criteria are retained.
324 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: February 2007