HP-UX Reference (11i v2 07/12) - 4 File Formats (vol 8)

l
ldapclientd.conf(4) ldapclientd.conf(4)
[automountmap]
This cache maps an automount map to its DN from the directory.
enable=yes |no ldapclientd
only caches entries for this section when it is
enabled.
By default, caching is enabled.
poscache_ttl= 0-2147483647
Seconds before a cache entry expires from the positive cache.
Typically, once added into a directory, the map’s DN rarely
changes.
Default value is 1800.
negcache_ttl= 1-2147483647
Seconds before a cache entry expires from the negative cache.
Default value is 7200.
[dynamic_group]
Cache settings for the dynamic group cache (which caches dynamic members of
groups, and dynamic groups that users belong to):
cache_size= 102400-1073741823
Maximum number of bytes that should be cached by ldap-
clientd
for dynamic groups. This value is the maximum
upper limit of memory that can be used by ldapclientd to
cache dynamic group information. If this limit is reached, new
entries are not cached until enough expired entries are freed.
Default value is 10000000.
enable=yes |no ldapclientd only caches entries for this section when it is
enabled.
By default, caching is enabled.
poscache_ttl= 0-2147483647
Seconds before a cache entry expires from the positive cache. If
group caching is enabled, this value must be greater than
poscache_ttl of [group].
Default value is 43200 (that is, 12 hours).
negcache_ttl= 1-2147483647
Seconds before a cache entry expires from the negative cache. If
group caching is enabled, this value must be greater than
negcache_ttl of [group].
Default value is 43200 (that is, 12 hours).
[printers] User configurable parameters for the printer configurator.
start= yes|no Define the status of the printer configurator when ldap-
clientd
starts. yes means printer configurator service will
be enabled when ldapclientd starts. no means printer
configurator will be disabled when ldapclientd starts.
By default, the printer configurator is enabled.
max_printers= 10-500
Define the maximum printer objects that the printer
configurator will handle.
Default value is 50.
search_interval=1800-1209600
Define the interval, in second, between printer configurator
searches for printer objects.
Default value is 86400.
186 Hewlett-Packard Company − 5 − HP-UX 11i Version 2: December 2007 Update