HP-UX Reference (11i v2 07/12) - 3 Library Functions N-Z (vol 7)

SLPError(3N) SLPError(3N)

SLP_BUFFER_OVERFLO -18

An outgoing request overﬂowed the maximum network MTU size. The request should be reduced in size or

broken into pieces and tried again.

SLP_NETWORK_TIMED_OUT -19

This error is returned when no reply can be obtained in the time speciﬁed by the conﬁgured timeout inter-

val for a unicast request.

SLP_NETWORK_INIT_FAILED -20

This error indicates that the network cannot initialize properly. This error will also be returned if an SA or

DA agent (slpd) can not be contacted. See

SLPReg() and SLPDeReg() in libslp(3N) for more informa-

tion.

SLP_MEMORY_ALLOC_FAILED -21

Out of memory error.

SLP_PARAMETER_BAD -22

This error is returned when the parameter passed to the function is bad.

SLP_NETWORK_ERROR -23

A networking failure during normal operations causes this error to be returned.

SLP_INTERNAL_SYSTEM_ERROR -24

A basic failure of the API causes this error to be returned. This occurs when a system call or library fails.

The operation could not recover.

SLP_HANDLE_IN_USE -25

In the C API, callback functions are not permitted to recursively call into the API on the same

SLPHan-

dle

, either directly or indirectly. If an attempt is made to do so, this error is returned from the called API

function.

SLP_TYPE_ERROR -26

If the API supports a type checking of registrations against service type templates, this error occurs if the

attributes in a registration do not match the service type template for the service.