HP-UX Reference (11i v2 07/12) - 1M System Administration Commands N-Z (vol 4)

nettlconf(1M) nettlconf(1M)

typically the product name of the subsystem. Several subsystems can be grouped

together so that a common banner is printed in the formatted header. This is a

required ﬁeld.

The following option is used to remove a subsystem description from the database.

-delete ssid (abbrev: -d) Deletes all information associated with the ssid (subsystem ID) from the

database.

WARNINGS

The

nettlconf utility is intended primarily for use by

HP subsystems to conﬁgure themselves into the

NetTL and KL facilites at installation time. System administrators may wish to use this command to alter

the default logging class each subsystem starts up with, but no other information about the subsystem

should be changed.

The

nettl, kl, and netfmt commands read the

/etc/nettlgen.conf

ﬁle each time they are exe-

cuted. If the ﬁle becomes corrupted these commands cannot function.

Some changes to the

/etc/nettlgen.conf

ﬁle do not take effect until

nettl, kl, and netfmt are

stopped and restarted.

AUTHOR

nettlconf was developed by HP.

FILES

/etc/nettlgen.conf

subsystem conﬁguration ﬁle maintained by nettlconf

/etc/rc.config.d/nettl

conﬁguration ﬁle controlling nettl during system startup