HP-UX Reference (11i v2 07/12) - 1M System Administration Commands N-Z (vol 4)

s
sasmgr(1M) sasmgr(1M)
NAME
sasmgr - utility to manage HP-UX Serial Attached SCSI (SAS) Mass Storage I/O cards / HBAs
SYNOPSIS
Path: /opt/sas/bin
sasmgr
[-h][-f] add -D
device_file -q raid -q level=raid_level
-q enc_bay=enc:bay[,enc:bay][
-q size=size][-q rebuild_rate =rate]
sasmgr [-h][-f] add -D
device_file -q raid -q spare -q enc_bay=enc:bay
sasmgr [-h][-f] bdr -D
device_file -q lun={all | lun_dsf}
sasmgr [-h] clear_stat -D device_file
sasmgr [-h] clear_stat -D device_file
-q all
sasmgr
[-h] clear_stat -D device_file
-q phy={all | phy_id}
sasmgr [-h] clear_stat -D device_file
-q phy_in_port= {all | phy_id}
sasmgr [-h] clear_stat -D device_file -q target={all | sasaddr}
sasmgr [-h][-f] delete -D device_file -q raid -q raid_vol= {rvol_id |
all}
sasmgr [-h][-f] delete -D device_file -q raid -q spare
sasmgr
[-h][-f] disable -D device_file
sasmgr [-h][-f] download -D device_file -q downloadfile=
filename -q enc_bay=enc:bay
sasmgr [-h][-f] download -D device_file -q downloadfile=
filename
-q ctrl=ctrl_device_file
sasmgr [-h] enable -D device_file
sasmgr [-h] get_info -D device_file
sasmgr [-h] get_info -D device_file -q lun={all | lun_dsf}
sasmgr [-h][-v] get_info -D device_file -q lun={all | lun_dsf}
-q lun_locate
sasmgr
[-h] get_info -D device_file -q pci_id
sasmgr
[-h] get_info -D device_file -q phy={all | phy_id}
sasmgr [-h] get_info -D device_file -q phy_in_port= {all | phy_id}
sasmgr [-h] get_info -D device_file -q raid
sasmgr
[-h] get_info -D device_file -q reg={all | offset}[
-q reg_type= { pci_config
| mmio }]
sasmgr [-h] get_info -D device_file -q smp=file_name
sasmgr [-h] get_info -D device_file -q smp_addr
sasmgr
[-h] get_info -D device_file -q target={all | sasaddr}
sasmgr [-h] get_info -D device_file -q vpd
sasmgr
[-h] get_stat -D device_file
sasmgr [-h] get_stat -D device_file -q phy={all | phy_id}
sasmgr [-h] get_stat -D device_file -q phy_in_port= {all | phy_id}
sasmgr [-h] get_stat -D device_file -q target={all | sasaddr}
sasmgr [-h][-f] replace_tgt -D device_file -q old_dev=lun_dsf
-q new_tgt_hwpath=new_hw_path
sasmgr [-h][-f] reset -D device_file
sasmgr [-h] set_attr -D device_file -q lun=lun_dsf -q locate_led= {on | off}
sasmgr [-h][-f] set_attr -D device_file -q raid -q raid_vol=rvol_id
-q state=vol_state
290 Hewlett-Packard Company 1 HP-UX 11i Version 2: December 2007 Update