HP-UX Reference (11i v2 07/12) - 1M System Administration Commands N-Z (vol 4)

n
naaagt(1M) naaagt(1M)
International Code Set Support
Supports single-byte character code sets except where the SNMP protocol supports only 7-bit characters
encoded in ASCII.
WARNINGS
The Native Agent Adapter only supports SNMP read requests (for example, SNMP Get). SNMP Set
requests must be sent directly to the third-party SNMP agent’s non-standard UDP port (
HP_NAA_PORT ).
If the
HP_NAA_PORT value is not a valid port number,
naaagt terminates without writing any error
message either to the display or to
/var/adm/snmpd.log
.
If there are no valid OIDs in the
naaCnf file, naaagt terminates. It does not register a default OID.
There may be unexpected results if the
-E
priority is outside the valid range.
AUTHOR
naaagt was developed by SNMP Research and Hewlett-Packard Company.
FILES
/etc/SnmpAgent.d/naa.cnf
Default naaCnf file. Not recommended.
/sbin/SnmpAgtStart.d
Directory for SNMP start-up and shutdown scripts.
/usr/sbin/naaagt
Native Agent Adapter command.
/usr/sbin/snmpdm HP SNMP Master Agent command.
/var/adm/snmpd.log
HP SNMP log file.
SEE ALSO
rc(1M), snmpd(1M), snmpd.conf(4).
HP-UX 11i Version 2: December 2007 Update − 3 − Hewlett-Packard Company 27