HP-UX Reference (11i v2 07/12) - 1M System Administration Commands N-Z (vol 4)

p
parunlock(1M) parunlock(1M)
NAME
parunlock - unlock the Stable Complex Configuration Data, Partition Configuration Data, Dynamic Com-
plex Configuration Data, Cell Data or cancel pending changes to the Stable Complex Configuration Data
SYNOPSIS
parunlock -p PartitionNumber [
-s][-d][-P
][-c cell]
[[
-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h
IPaddress|hostname ]]
parunlock -s [-d][-P
][-c cell][-p PartitionNumber]
[[
-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parunlock -d [-s][-P][
-c cell][-p PartitionNumber]
[[
-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parunlock -c cell [-d][
-s][-P][-p PartitionNumber]
[[
-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parunlock -P [-A][-s][-d][-c cell][-p
PartitionNumber]
[[
-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parunlock -A [-P]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
DESCRIPTION
The
parunlock command unlocks the specified Partition Configuration Data, the Dynamic Complex
Configuration Data, the Stable Complex Configuration Data, specified cell data or cancels pending changes
to the Stable Complex Configuration Data or any combination of these.
This command should be used with caution. It should be used only when the system resources are locked
due to the abnormal termination of any partition command or other similar applications.
Root permission is required to run this command on the local partition. If the -u
or -g option is used to
access a remote partition or complex, root permission is not required on the local system, and the local sys-
tem need not exist on an nPartition. If the
-u option is specified, username on the remote host must have
root permission or the command will fail.
Refer to the HP System Partitions Guide for a description of the partition management terms used in this
man page.
Options and Arguments
parunlock recognizes the following command line options and arguments:
-p PartitionNumber
Unlocks the Partition Configuration Data of the specified target partition on the target
complex. PartitionNumber specifies the unique number (integer) assigned to the partition
when it was created.
-d Unlocks the Dynamic Complex Configuration Data of the target complex.
-s Unlocks the Stable Complex Configuration Data of the target complex.
-c cell Unlocks the cell data of the specified cell. A cell can be specified either in the local
(cabinet#/slot#) or global (cell#) format. For example, the cell located in cabinet 0, slot 1 is
identified in the local format as 0/1 or in the global format as 1.
-u username:[passwd]
Specifies the required authorization to access a partition other than the local partition (but
can also be used as a loopback access to the local partition). The complex to be modified is
the one in which this target partition resides.
The -h option is required if this option is used.
username specifies a configured user name on the target partition.
142 Hewlett-Packard Company − 1 − HP-UX 11i Version 2: December 2007 Update