HP-UX Reference (11i v2 07/12) - 1M System Administration Commands A-M (vol 3)

amutil(1M) amutil(1M)

EXAMPLES

Flash the amber LEDs on all the disks in disk array RACK_51:

amutil -F RACK_51

Stop ﬂashing the amber LEDs on disk array RACK_51:

amutil -s RACK_51

The following example alters the rebuild priority settings. It assigns a value of 5 seconds to the rebuild

command rate, and sets the data block amount to 16 blocks on LUN 4 on disk array RACK_51. This gives

host I/Os higher priority than the default settings.

amutil -R 4 -f 50 -a 16 RACK_51

DEPENDENCIES

AM60Srvr must be running to execute this command. See AM60Srvr(1M).

AUTHOR

amutil was developed by HP.