HP-UX Reference (11i v2 07/12) - 1M System Administration Commands A-M (vol 3)

f
fsdb_vxfs(1M) fsdb_vxfs(1M)
allocation unit header.
iau Set the current position in the file system to the current inode allocation unit (iau)
position. If it is the last command on a line, print the inode allocation unit header.
#ai Set the current position in the current fileset to the ilist entry for the specified attri-
bute inode. Set the current attribute inode position to the resulting offset. If it is the
last command on a line, print the ilist entry for the inode.
+|- # ai Set the current position in the current fileset to the ilist entry for the specified relative
attribute inode. Set the current attribute inode position to the resulting offset. If it is
the last command on a line, print the ilist entry for the inode.
ai Set the current position in the current fileset to the current attribute inode position.
If it is the last command on a line, print the ilist entry for the inode.
#i Set the current position in the current fileset to the ilist entry for the specified inode.
Set the current inode position to the resulting offset. If it is the last command on a
line, print the ilist entry for the inode.
+|- # i Set the current position in the current fileset to the ilist entry for the specified relative
inode. Set the current inode position to the resulting offset. If it is the last command
on a line, print the ilist entry for the inode.
i Set the current position in the current fileset to the current inode position. If it is the
last command on a line, print the ilist entry for the inode.
a# Set the current position to specified offset in blocks specified by the inode address #.
Addresses 0 through 9 are for direct extents ( de ). Addresses 10-11 are for indirect
extents ( ie ). The addresses are displayed when printing an ilist entry. Set the
current block position to the resulting offset. If it is the last command on a line, print
the first word in the block in hexadecimal.
im Set the current position to immediate data area of the current inode. Set the current
block position to the resulting offset. If it is the last command on a line, print the first
word of the area in hexadecimal.
attr Set the current position to attribute data area of the current inode. Set the current
block position to the resulting offset. If it is the last command on a line, print the first
word in the block in hexadecimal.
# B|H|W|D =# [#]
Set the current position and change the number at the specified offset to the given
number. If a double-word offset is specified, then two numbers separated by a space
are required. The resulting value is printed in hexadecimal.
+|-# B|H|W|D =# [#]
Set the current position and change the number at the specified relative offset to the
given number. If a double-word offset is specified, then two numbers separated by a
space are required. The resulting value is printed in hexadecimal.
# B|H|W|D = string
Set the current position and change the characters at the specified offset to the given
string. The resulting value is printed as a character string.
+|- # B|H|W|D = string
Set the current position and change the characters at the specified relative offset to
the given string. The resulting value is printed as a character string.
olt Set the current position to the object location table (olt). If it is the last command on a
line, print the object location table.
p [#] format
Print the contents of the file system at the current offset as the specified number of
entries of a given format. The allowable print formats are specified above. If a
number of entries to print is not specified, one entry is printed.
inode_field =#
Set the contents of the given inode field to the specified number. The current inode
specifies the inode list entry to be modified. The symbols representing inode fields are
listed above.
304 Hewlett-Packard Company − 6 − HP-UX 11i Version 2: December 2007 Update