HP-UX Reference (11i v2 07/12) - 1M System Administration Commands A-M (vol 3)

f
frupower(1M) frupower(1M)
• Use the cimconfig command (see cimconfig(1M) in the WBEM product documentation) to verify (and
correct if necessary) the setting of the following two variables:
•
enableRemotePrivilegedUserAccess=true
• enableHttpsConnection=true
• You must have appended the target partition’s digital certificate to the local partition’s Trust Store file.
For the nPartition commands, the Trust Store file is
/var/opt/wbem/client.pem
.
Note: You must have appended the target partition’s digital certificate to the local partition’s Trust
Store file. For the npartition commands, the Trust Store file is
/var/opt/wbem/client.pem
.
This file is used by the commands that come with WBEM installation. Hence, if the commands that
come with the WBEM installation trust a target partition, then npartition commands will also trust the
target partition.
Refer to the WBEM documents specified in the SEE ALSO section below for further information.
AUTHOR
frupower was developed by the Hewlett-Packard Company.
SEE ALSO
fruled(1), parstatus(1), cplxmodify(1M), parcreate(1M), parmgr(1M), parmodify(1M), parremove(1M),
parunlock(1M), partition(5).
HP System Partitions Guide on http://docs.hp.com
,
HP WBEM Services for HP-UX System Administrator’s Guide on
http://docs.hp.com,
HP WBEM Services for HP-UX 11i v2.0 on Integrity Servers Version A.01.05 Release Notes on
http://docs.hp.com
.
HP-UX 11i Version 2: December 2007 Update − 4 − Hewlett-Packard Company 273