HP-UX Reference (11i v2 07/12) - 1M System Administration Commands A-M (vol 3)

d
drd_register_mirror(1M) drd_register_mirror(1M)
NAME
drd_register_mirror - notify DRD that a system image has been manually mirrored using LVM or VxVM
commands
SYNOPSIS
drd_register_mirror
[-?] mirror_block_device_file
DESCRIPTION
The
drd_register_mirror
command notifies DRD that either the active system image or the inactive
system image has been mirrored to the mirror_block_device_file specified.
The
drd_register_mirror
command must be run after the mirror has been created.
Options
drd_register_mirror
recognizes the following option:
-? Displays the usage message.
Operands
drd_register_mirror
recognizes the following operand:
mirror_block_device_file
The block device special file of the mirror disk. The file should refer to the entire disk, not
to a partition.
RETURN VALUE
drd_register_mirror
returns one of the following values:
0 Success.
1 Error.
2 Warning.
EXAMPLES
To display drd_register_mirror
usage information:
drd_register_mirror -?
To notify DRD that all logical volumes in the root group have been mirrored to disk
/dev/dsk/c1t2d0:
drd_register_mirror /dev/dsk/c1t2d0
To notify DRD that all logical volumes in the inactive system image have been mirrored to disk
/dev/dsk/c2t3d0.
drd_register_mirror /dev/dsk/c2t3d0
AUTHOR
drd_register_mirror
was developed by HP.
SEE ALSO
drd-activate(1M), drd-clone(1M), drd-deactivate(1M), drd-mount(1M), drd-runcmd(1M), drd-umount(1M)
Dynamic Root Disk Administrator’s Guide, available on the HP Technical Documentation web site at
http://docs/hp.com/en/DRD.
HP-UX 11i Version 2: December 2007 Update − 1 − Hewlett-Packard Company 217