HP-UX Reference (11i v2 07/12) - 1M System Administration Commands A-M (vol 3)

b
bootpd(1M) bootpd(1M)
hd=home-directory
This tag specifies a directory name to which the bootfile is appended (see the
bf tag above). The
default value of the
hd tag is /
.
hn The presence of this tag indicates that the client’s host name should be sent in the boot reply.
The
hn tag is a boolean tag. bootpd
attempts to send the entire host name as it is specified in
the configuration file or hosts database. The configuration file is checked first, if the host name
is not found, the hosts(4) database is then checked. If the hostname cannot fit into the reply
packet, an attempt is made to shorten the name to just the host field (up to the first period, if
present) and then tried. In no case is an arbitrarily truncated host name sent. If nothing rea-
sonable can fit, nothing is sent.
im=ip_address_list
This tag specifies the IP addresses of Impress network image servers.
ip=ip-address
This tag specifies the IP address of the DHCP/BOOTP client.
lg=ip_address_list
This tag specifies the IP addresses of MIT-LCS UDP log servers.
lp=ip_address_list
This tag specifies the IP addresses of Berkeley 4BSD printer servers.
md=merit_dump_file
This tag specifies the name of a file to dump the core of a client.
ms=ip_address_list
This tag specifies the IP address(es) of SMTP servers available to the client (RFC2132).
na=ip_address_list
This tag specifies the IP address(es) of RFC 1001/1002 NetBIOS name server(s) in order of
preference.
nb=ip_address_list
This tag specifies the IP address(es) of RFC 1001/1002 NetBIOS datagram distribution server(s)
in order of preference.
nc=NetBIOS_node_type
Specifies the NetBIOS node type code. Allows NetBIOS over TCP/IP clients to be configured as
described in RFC1001/1002. The NetBIOS_node_type can be an unsigned decimal, octal, or hexa-
decimal integer corresponding to one of the client types as follows:
0x1 or B-node for B-node;
0x2 or P-node for P-node;
0x4 or M-node for M-node;
0x8 or H-node for H-node.
nd=string
This tag specifies the NetBIOS over TCP/IP scope parameter for the client as specified in RFC
1001/1002.
ns=ip_address_list
This tag specifies the IP addresses of IEN-116 name servers.
nt=ip_address_list
This tag specifies the IP addresses of Network Time Protocol servers. Servers should be listed in
order of preference.
pd=NIS+-domain-name
This tag specifies the name of clients NIS+ domain name (RFC2132).
ps=ip_address_list
This tag specifies the IP address(es) of NIS+ servers available to the client (RFC2132).
rl=ip_address_list
This tag specifies the IP addresses of RFC887 Resource Location Protocol servers.
rp=root_path
This tag specifies a path name to be mounted as a root disk.
108 Hewlett-Packard Company − 5 − HP-UX 11i Version 2: December 2007 Update